Trail weight and pitched footprint matter more than the season label · review
A freestanding 20D nylon tent that names its pole alloy and gives a 4000 mm (157.5 in) figure to the fabric rather than to a panel, so the floor is left without one.
A 210 × 255 × 100 cm (82.7 × 100.4 × 39.4 in) size for two, 20D nylon with a silicone coating and taped corners and seams, a fabric rain resistance figure of 4000 mm (157.5 in) and above, a freestanding construction on one integrated 7001 aluminum alloy pole with clips, ultralight three-sided aluminum pegs with reflective heads, a B3 mesh inner, two D-shaped mesh doors with two-way zips, a large mesh window, two ceiling vents, removable triangular storage panels on both sides, inner pockets and a lamp hook. The title gives 1.9 kg (4.2 lb).
4000 mm and above, for the fabric. The bullet describes a fabric with that rain resistance. Rain resistance is a flysheet property, and we have recorded it there.
The floor gets no figure. A groundsheet takes pressure rather than falling water, and it is the figure that decides whether a wet pitch reaches you. It is not published.
7001 aluminum. Most listings on this shelf either say aluminum or say nothing. Naming the alloy is a claim you can compare against a replacement section, and it is the part of a tent most likely to need one.
Freestanding, with clips rather than sleeves. Clips pitch faster, dry faster and put less abrasion on a 20D fly than sleeves do.
Read the 210 × 255 × 100 cm (82.7 × 100.4 × 39.4 in) carefully — the maker does not say which of the first two figures is the sleeping length, and a 255 cm (100.4 in) dimension is unusually long for a two-person floor. Ask before assuming.
The American Amazon store returned nothing, so the buy link opens a local search rather than a page that is not there.
Every figure here is what Keepa held on the day this page was last revised. Offers and prices shift without warning.
A listing is not an offer: the reference exists on these stores, availability changes daily.
| Trail weight | Not published on the listing — one figure appears, in the title, without a label |
|---|---|
| Packed weight | 1.9 kg (4.2 lb) — stated in the title, with no indication of what is counted |
| Floor area | 210 × 255 cm (82.7 × 100.4 in) — stated as part of a 210 × 255 × 100 cm (82.7 × 100.4 × 39.4 in) size; the maker does not say which figure is the length |
| Peak height | 100 cm (39.4 in) — stated as the third figure of the 210 × 255 × 100 cm (82.7 × 100.4 × 39.4 in) size |
| Hydrostatic head — flysheet | 4000 mm (157.5 in) and above — stated for the fabric’s rain resistance, not attributed to the flysheet specifically |
| Hydrostatic head — groundsheet | Not published on the listing — the single fabric figure is never attributed to the floor |
| Fabric denier | 20D nylon with a silicone coating — stated, with taped corners and seams |
| Pole material | 7001 aluminum alloy — stated, as one integrated pole with clip attachment; the pegs are aluminum three-sided stakes |
| Pitch type | Freestanding — stated |
| Season rating | Not published on the listing |
| Amazon reference | B0DQXKZ7C2 |
| EAN | 6936876856387 |
It is a high-strength aluminum used for tent poles precisely because it takes a bend and springs back. Naming the grade rather than saying aluminum is a specific claim about the part that fails first in wind, and it is the kind of detail that can be checked against a spare.
Freestanding means it holds its shape unpegged, not that it stays where you left it. The guylines and pegs are what stop it moving in wind and what tension the fly away from the inner to keep condensation off you.
No. Not published on the listing — one figure appears, in the title, without a label. What the listing does publish instead is the pole material: 7001 aluminum alloy — stated, as one integrated pole with clip attachment; the pegs are aluminum three-sided stakes.
7.8/ 10
A freestanding 20D tent with its pole alloy on the page and its floor figure absent. For pitches on platforms, gravel or hard ground it is the sensible pick of this group; on saturated ground the missing groundsheet number is the gap.
Two people who camp where pegs may not bite and want a named pole alloy under a 20D fly.
Specifications: the manufacturer sheet for camping and hiking gear and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
One person · freestanding · aluminum poles · PU 5000 bathtub floor · 1.9 kg (4.2 lb) unlabelled · 38 × 13 × 13 cm (15 × 5.1 × 5.1 in) packed
A one-person tent that publishes the figure most listings skip — 5000 mm (196.9 in) on the floor — and leaves the flysheet without a water column of its own.
Best for: One person on soft ground who wants a floor figure published and a vestibule for boots and a pack.
One person · 1.5 kg (3.3 lb) unlabelled · 3000 mm (118.1 in) fly · PE floor with no figure · fiberglass poles · pegs required
A 1.5 kg (3.3 lb) solo tent that states its fly water column, admits in its own bullet that it will not stand without pegs, and leaves the floor figure out.
Best for: Bike and motorcycle touring on ground soft enough for pegs, where a 12 × 38 cm (4.7 × 15 in) roll is the constraint.
Two person · two doors and two vestibules · 68D polyester · 2.5 kg (5.5 lb) unlabelled · no water column published
A two-door two-person tent that publishes its fabric denier — rare on this shelf — and no water column at all, and whose floor dimension is cut off mid-sentence.
Best for: Two people who want a door each and a thicker 68D fabric, on pitches where rain is a shower rather than a night of it.
