R-value carries the warmth; thickness decides whether your hip lands · review
A 925 g (32.6 oz) mat that publishes its thickness, its packed roll and its fabric, and never says how long or how wide it is.
A thickness of 10 cm (3.9 in), an integrated foot pump with the mat ready in one minute, a packed size of 10 × 28 cm (3.9 × 11 in), a weight of 925 g (32.6 oz), 40D ripstop nylon described as tear-, puncture- and abrasion-resistant, and a TPU coating making the mat water- and weather-resistant.
10 × 28 cm. Among the mats in this group that publish a packed size in centimeters, this is the tightest — 26 × 15 × 15 cm and 32 × 14 × 10 cm are its neighbors. For a mat with a pump built into it, that is a good result.
Length and width. Nothing. The mats in this group run 190 to 200 cm long and 60 to 83 cm wide, and where this one sits in those ranges is not published.
That is the first thing to know about a sleeping mat, and the only listing here to omit both. Everything else — the 10 cm (3.9 in), the 925 g (32.6 oz), the 10 × 28 cm (3.9 × 11 in) roll, the fabric — is on the page.
40D ripstop rather than plain 40D. The reinforcing grid means a puncture stays a puncture instead of becoming a tear, which on a mat that spends its life on grit is the difference that shows up over seasons rather than nights.
No R-value, no standard. Ten centimeters of air is comfort, not warmth: air moves inside an uninsulated chamber, and nothing on this page describes what stops it.
Ask the seller for the inflated length and width. Without them the 10 cm (3.9 in) and the 925 g (32.6 oz) describe a product you cannot check against yourself.
The American Amazon store returned nothing, so the buy link opens a local search rather than a page that is not there.
Every figure here is what Keepa held on the day this page was last revised. Offers and prices shift without warning.
A listing is not an offer: the reference exists on these stores, availability changes daily.
| R-value | Not published on the listing — no insulation figure appears in the listing |
|---|---|
| Standard quoted | None named — no ASTM F3340 reference appears in the listing |
| Thickness | 10 cm (3.9 in) — stated in the title |
| Packed size | 10 × 28 cm (3.9 × 11 in) — stated |
| Weight | 925 g (32.6 oz) — stated, with no label saying what is counted |
| Width | Not published on the listing |
| Length | Not published on the listing |
| Fabric denier | 40D ripstop nylon — stated, with a TPU coating described as making the mat water- and weather-resistant |
| Inflation method | Integrated foot pump — stated to have the mat ready in one minute |
| Amazon reference | B0C78LPKWN |
| EAN | 8720938434112 |
A grid of heavier threads woven into the fabric at intervals, so a tear stops at the next thread instead of running. On a mat that lives on grit and pine litter it is a meaningful upgrade over plain nylon at the same denier, and naming it is worth something.
It is the first question about a mat. Mats in this group run from 190 to 200 cm (74.8 to 78.7 in), and the difference decides whether your feet are on the mat or on the ground. Nothing here answers it.
No. Not published on the listing — no insulation figure appears in the listing. What the listing does publish instead is the fabric denier: 40D ripstop nylon — stated, with a TPU coating described as making the mat water- and weather-resistant.
8.4/ 10
Well described on everything except where you lie on it. The 10 × 28 cm (3.9 × 11 in) roll and the ripstop face are real advantages; the absent length and width are the reason to ask the seller before ordering.
Campers who want 10 cm (3.9 in) and a small packed roll from a foot pump, and will confirm the sleeping dimensions before buying.
Amazon reports what buyers took in the month before this page was last checked: at least 600.
The figure is a floor, rounded by Amazon, and read through Keepa — it says what buyers picked, not what a maker claims.
Specifications: the manufacturer sheet for camping and hiking gear and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
R 2.1, standard unnamed · XPE foam with aluminum film · 70.8 × 23.6 × 0.36 in · 0.7 lb
A folding XPE foam mat with a heat-reflective aluminum film and a published insulation rating of 2.1 — "tested to standard", with the standard never named.
Best for: A foam layer that packs flat rather than rolled, with a figure behind its warmth
≈ $25
531 g (18.7 oz) · 190 × 60 cm (74.8 × 23.6 in) inflated and 225 × 70 cm (88.6 × 27.6 in) flat · 40D material · inflated by breath · repair kit included · no R-value
A 531 g (18.7 oz) mat that publishes both its flat and its inflated dimensions — an honest distinction most listings skip — and no thickness and no R-value.
Best for: Lightweight trips where 531 g (18.7 oz) and a 190 cm (74.8 in) sleeping length are the specification, and warmth comes from the bag.
Built-in foot pump · 40D nylon/TPU · 78 × 27 in · 3 in in one line, 8 in in the next
The widest mat in this group at twenty-seven inches, with a built-in foot pump, a built-in pillow and side buttons to join two together — and a thickness published as three inches and as eight.
Best for: Two mats buttoned into a double bed, with no separate pump or pillow to pack
≈ $30
Prices in these summaries were read on the dates each review gives. The live figure sits beside every product.
