The opening decides whether it dries; the liters only decide weight · review
A 2 liter EVA reservoir that publishes something almost nobody on this shelf does — how its seams are made — along with its outside dimensions, an auto-lock mouthpiece and a 100 cm (39.4 in) hose.
Two liters, an EVA film stated BPA-free, a screw cap over a fill port described as large, a 100 cm (39.4 in) detachable hose with an auto-lock system and a soft mouthpiece, double-sided EVA heat sealing without adhesive, an internal silicone seal, reinforced joints between hose, spout and reservoir, dimensions of 36 cm (14.2 in) × 17 cm (6.7 in), a stated range of -20 to 50 °C (-4 to 122 °F) and a stated pressure figure of 60 kg (132.3 lb).
Heat sealed, no adhesive, reinforced joints. Reservoirs do not usually fail in the middle of a panel. They fail where the hose meets the film, and where two sheets are joined. This listing describes both, which puts it ahead of every other reservoir here except one.
Fill port width. The hub compares on it because a wide opening is what lets a reservoir be turned back, brushed and hung to dry. Large is not a width, and a screw cap sets an upper bound on how large it can be.
Hose internal diameter. Stated nowhere, as on every other reservoir in this family. A hundred centimeters is a length; it says nothing about how hard the tube draws or what fittings it accepts.
Hold the 36 × 17 cm (14.2 × 6.7 in) figure against the reservoir sleeve in your pack. It is the one dimension published here that answers a question you can ask now rather than after it arrives.
The American Amazon store returned nothing, so the buy link opens a local search rather than a page that is not there.
Every figure here is what Keepa held on the day this page was last revised. Offers and prices shift without warning.
A listing is not an offer: the reference exists on these stores, availability changes daily.
| Capacity | 2 liters — stated |
|---|---|
| Opening type | Screw cap, described by the maker as a large fill port — stated |
| Fill port width | Not published on the listing — described as large; the reservoir itself is given as 360 mm (14.2 in) (36 cm) × 17 cm (6.7 in) |
| Hose internal diameter | Not published on the listing — the hose is stated as 100 cm (39.4 in) long and detachable, which is a length rather than a bore |
| Bite valve | Not published on the listing — a soft mouthpiece is stated, opened with the mouth, and the maker does not call it a bite valve |
| Shut-off | An auto-lock system — stated |
| Quick-disconnect fitting | Not published on the listing — the hose is stated to be detachable, without naming a coupling |
| Film material | EVA, stated BPA-free, described as flexible and pressure-resistant |
| Seam construction | Double-sided EVA heat sealing without adhesive, with an internal silicone seal and reinforced joints between hose, spout and reservoir — stated |
| Stated cleaning method | Soapy water — stated by the maker for the first wash, to clear the initial plastic smell; the large fill port is stated to ease filling and cleaning |
| Empty weight | Not published on the listing |
| Amazon reference | B0GGQY25B3 |
| EAN | 0768679527364 |
Because a reservoir fails at a seam or at a hose joint long before the film wears out. This maker states how both are made — heat sealed without adhesive, with reinforced joints — and that is a more useful sentence than most listings on this shelf contain.
Less easily than a slide top, because the opening is only as wide as the cap. This one is described as large without a figure, so how far a brush or a hand reaches is not something the listing settles.
No. Not published on the listing — described as large; the reservoir itself is given as 36 cm (14.2 in) × 17 cm (6.7 in). What the listing does publish instead is the stated cleaning method: Soapy water — stated by the maker for the first wash, to clear the initial plastic smell; the large fill port is stated to ease filling and cleaning.
7.8/ 10
The reservoir that describes its own construction. What it does not describe is the opening width, and on this shelf that is the specification that decides whether it survives a season.
A pack with a known reservoir sleeve, where the seam construction matters more than a wide opening does.
Amazon reports what buyers took in the month before this page was last checked: at least 50.
The figure is a floor, rounded by Amazon, and read through Keepa — it says what buyers picked, not what a maker claims.
Specifications: the manufacturer sheet for camping and hiking gear and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
2 L reservoir · large opening, type not named · hose supplied · almost nothing else published
A 2 liter reservoir sold with a hose, whose listing publishes the capacity and then almost nothing else — no opening type, no film, no valve, no fittings and no weight.
Best for: A replacement reservoir where the pack sleeve is the only constraint and the details are worked out on arrival.
3 L reservoir · two hoses, summer and winter · cleaning brush included · opening type not named
A 3 liter reservoir that ships with two drinking hoses and a cleaning brush — three items other listings sell separately — while naming neither the opening, nor the film, nor the valve.
Best for: Someone who wants the brush and the winter hose in the same box and will find out about the opening on arrival.
Two 2 L reservoirs, 70 oz each · 4 in screw cap, the widest port stated here · bite valve with on/off · quick-release with auto-lock · a neck gaiter supplied · no bore, no film named
Two complete reservoirs for sixteen dollars, with the widest fill port stated on this shelf at four inches — on a page whose wording appears under two other brands in this same group.
Best for: Two people, or a spare kept filled in a fridge, where price per reservoir is the whole decision
≈ $16
Prices in these summaries were read on the dates each review gives. The live figure sits beside every product.
